The Product

Flash Strip® is a self- adhesive tape made of a Bituminous Compound, self Protected by Re-enforced Aluminum Foil one side and release paper/film on other. It is available in various sizes.

Flash Strip® is highly adhesive to all materials and especially to plastic, glass, steel, polycarbonate, wood, asbestos, fiberglass, textiles and concrete as well.

Characteristics

  • Cold Applied.
  • Waterproof.
  • Excellent adhesive properties at low temperatures.
  • Excellent heat stability.
  • No flowing under heat.
  • No Oil Migration.
  • Resistant to ageing and UV-rays.
  • Solvents Free.

Applications

Waterproofing, Sealing and Jointing materials such as Glass, Steel, Polycarbonate, Wood, Aluminum, PVC, Industrial Roofing, Pipes, Cable, Skylights, parapets etc.

Surface Preparation

Flash Strip®is compatible with most building materials, metals and flexible or hard plastics. The Surface should be clean, dry, smooth and dust-free. No Special tools are required to install this tape.

Installation

Prepare the surface and proceed as follows;

  • Choose the most suitable size of the Flash Strip®
  • Unroll the Tape until the desired length is reached.
  • Remove the silicone release paper/film that covers the adhesive part of the tape and position the tape.
  • Press with a roller or a cloth pad.

Storage

The quality and the characteristics of materials remain unaltered for a long period of time. The Product is however best used within 12 months. The Product must be correctly stored in cool and dry premises, at or below 25°C room temperature. It is not affected by Frost.

CHARACTERISTICS VALUE
THICKNESS 1.2 MM
U. V. RESISTANCE Resistant
TENSILE STRENGTH Long. > 200 N/50mm | Trans. > 200 N/50mm
ELONGATION AT BREAK Long. > 20% | Trans. > 20%
IMPACT RESISTANCE 1750 mm
APPLICATION TEMPERATURE +5°C / +45°C
SERVICE TEMPERATURE -40°C / +80°C

Dimensions and Packaging

Standard Length: 10 Mtr.

Standard Thickness: 1.2 mm

Standard Widths: 50 mm- 100 mm – 150mm

Other widths, length and thickness are available on request. The Rolls are packed in Corrugated Boxes.

Caution and Safety

The material is not hazardous for normal uses. Keep out of reach of children. Possible han Abrasions in particular conditions.

Important Notes

The manufacturer disclaims all liability for product use and applications. No generic guarantees can be provided, even if the instructions indicated on this sheet are followed.

=========================================

OSAKA RUBBER PVT. LTD.

6/103, Mittal Indl Estate, Andher- Kurla Road,

Andheri (East), Mumbai – 400 059

Tel: 91-22-4204 4204 / 28502064 /1083, Fax:91-22-28504082

Email: osakarubber@vsnl.com; Web: www.osakarubber.com

(0)