Now Buy B – GUARD Patch Fittings series from Glazingshopee.com

Our quality policy is to Manufacturing and supply architectural products to the requirement and satisfaction of our customers. Our objective is to continuous improvement in the quality of our products through an effective quality management system, technical improvements, cost effectiveness, employees involvement and develop competency.

asdSpecification:

  • Equipped with steel pivot pin head of Diameter 15mm
  • Cover Plated SS 304
  • Finish SSS/PSS

For More Product click here


asdasdfsd

Specification

  • Patch Lock to secure swing doors
  • Bolet Projection of 15 mm (single Action)
  • Supplied With three computerized high quality keys formaximum protection
  • Cover palte ss 304
  • Finish SSS/PSS

For More Product click here


Capture

PRODUCT INTRODUCTION

The product features consummate craftsmanship and superior functions, suitable for common and toughened glass door, wooden door hotel, store and office building

SUGGESTIONS ON FLOOR HINGE SELECTION

  1. Selection of different models fo floor HINGE is mainly based on glass door weight.
  2. Calculation of glass weight: according to national standard, 1 mm thick common and toughened glass is 2.5 kg per square meter. As to 12 mm thick, 2.3 m high and 1 m wide glass door commonly used in the country at present, the weight shall be 2.3x1x12x2.5=69 kg.
  3. The weight of the entire door can begot by adding up the weight of all accessories and the weight of glass.
  4. If heavy-duty floor HINGE is chosen for a light-weight glass door, the cost will increase and you cannot abtain good opening effect because it is heavy-duty.
  5. If floor HINGE with inadequate weight bearing is chosen to reduce project costs, it will directly influence service life of loor HINGE.
  6. For an outside door, taking wind power into consideration, twin-cylinder floor HINGE should be chosen regardless of door sizes.
  7. In cold area, floor HINGE with anti-freeze hydraulic oil injected should be chosen, so as to revent malfunction of floor HINGE at a very low temperature.

For More Product click here


sdfsfgdgf

SFsfb

For More Product click here


asdfsfdDOOR ACCESSORIES

Specification :

  • Floor Pivot for Framed and wooden doors
  • Manual opening and closing of doors
  • High Quality Casting body SS-304
  • Pivot to suit standard Bottom Patch Installation
  • Idea Form making Small Revolving doors for Office and Parks etc

For More Product click here


SDF

DOOR HANDLES

Spaecification

  • Stainless steel Grade 304
  • Two point fixing with door
  • Integral locking facility
  • Key operated form outside
  • Thumb turn inside
  • supplied with high security keys
  • Dead Bolt movement 32mm
  • Finish: SSS

For More Product click here


adadada

For More Product click here


SDFSGF

GLASS DOOR KNOBS

Specifications

  • Knobs supplied with high quality rubber gaskets to prevent damage to glass and reduce vibration.
  • Made from Certified Stainless steel grade 304 for superior rust prevention.
  • Precision design for a secure back to back installation.
  • Superior quality mirror polish.

For More Product click here


SDFSDFSFSGDFG

SLIDING DOOR SYSTEM/ SENSOR DOOR

  • The micro computer control adopts German technology, so it can detect weight and size of the door quickly and accurately. Optimal parameters can be set for it to keep the door in the best condition. Running condition of the door can be remembered. Besides, it has adjusting function and is highly intelligent zed.
  • The remote control function, safe and reliable.
  • The width power source, low power consumption, efficiency high- performance, is stable.
  • Adopt brushless OC Motor and turbine worm reducer, high torque, high efficiency, long operating life.
  • Best humanity design, good safety, has encounter obstacles protection detection function.
  • Motor lock function, when door fully closed, remain closing, need not electric (switch) lock.
  • Half open function, can set opening position freely. Cooperate with various of access control modes.
  • The high quality post-sale service.

For More Product click here


SLIDING DOOR SYSTEM

ASDASD

121

For More Product click here


SHOWER CUBICLE

ASDADASD

ADADA

Specifications

  • All fittings in MIRROR finish for aesthetic looks
  • Assembly parts made with Genuine Stainless Steel SS304 grade.
  • Height adjustable as per actual site conditions.
  • suitable for bathroom and office sliding applications fittings ideal for use In glass 8-10-12mm

For More Product click here


BRASS SHOWER HINGES 

SDADADADAS

For More Product click here


FASFSD

STAINLESS STEEL SHOWER HINGS 

Specifications 
• German technology especially designed for frame less glass showers.
• High quality gaskets resistant to extreme temperatures keep the glass in position.
• Self closing from up to 30 degrees of opening.
• Tested to 1,00,000 cycles.
• Made with high quality Stainless Steel Grade 304.
• Superior quality Satin hairline finish for elegant looks.
• Recommended maximum door weight: 50kg (for 2 hinges).
• ideal for 8 to 10 mm glass thickness.

For More Product click here


GLASS CONNECTORS

ASDADASD

Specifications
• Used to hold fix glass with wall or with fix glass to fixed angle.
• High-strength structure for safety and firm grip.
• High quality gaskets resistant to extreme temperatures to keep the glass in position.
• Made from Certified stainless steel grade 304 for superior rust prevention.
• Contemporary design for better aesthetics.
• Superior quality Mirror & Satin Finish.
• Recommended for 8 to 10 mm glass thickness.

For More Product click here


KNIGHT HEAD ACCESSORIES

DZCVDFDHG

Specifications
• System for adding strength to glass shower cabins.
•German design to reduces vibrations and lateral movement of glass panels.
• Made from Certified stainless steel grade 304 for superior rust prevention.
• Superior quality Mirror & Satin polish.
• All fittings suitable for pipe Dia 19mm.

For More Product click here


PLASTIC SEALS 

SDAASAAADAD

Specifications
• Made from superior quality co-extruded PVC materials for long life.
• Resistant to extreme temperature fluctuations.
• Will not crack or harden over prolonged usage.
• Useful for any kind of glass to glass or surface to glass contact.
• Precision engineering for smooth and secure glass gripping.
• High transparency for elegant looks.

For More Product click here


SPIDER FITTINGS 

SADASDASDADSGRHJ

Specifications
• Spider fittings provide a unique combination of strength and elegance.
• Designed for giving maximum strength to weight ratio.
• Installed with articulated/fixed routes.
• Flexibility in installation.
• Made from Certified Stainless Steel grade 316 for superior rust prevention.
• Superior quality satin finish.

For More Product click here


Leave a Reply

You must be logged in to post a comment.